Fluor Protein- & Aqueous Film-forming Protein Foam Concentrates

FLUOR-FOAMOUSSE^®

are protein-based low-expansion foam concentrates combined with C6 fluorinated additives. The fluorinated components cause the foam to be oil-repellent (oleophobic), meaning the foam does not mix with the fuel, and increase flowability and fire performance significantly.

FLUOR-FOAMOUSSE^® 3%	Details
Proportioning rate
Low-expansion foam	3%

Expansion
Low-expansion foam	up to 8 times

25% / 50% drain time
Low-expansion foam	up to 8 / 12 minutes

Frost-resistant	-15 °C
Viscosity
20 °C	≤ 30 mm²/s
0 °C	≤ 60 mm²/s
lowest use temp.	≤ 120 mm²/s

FLUOR-FOAMOUSSE^® 6%	Details
Proportioning rate
Low-expansion foam	6%

Expansion
Low-expansion foam	up to 8 times

25% / 50% drain time
Low-expansion foam	up to 8 / 12 minutes

Frost-resistant	-15 °C
Viscosity
20 °C	≤ 30 mm²/s
0 °C	≤ 60 mm²/s
lowest use temp.	≤ 120 mm²/s

Primary use: Chemical and petrochemical industry, refineries, aviation, maritime, tank storage facilities

Main application: non-polar hydrocarbon fires, hydrocarbons with small proportions of polar solvents.

Installations and equipment: Low-expansion foam installations, sub-surface installations, foam / water monitors, low-expansion foam branchpipes

FLUOR-FOAMOUSSE^®are physiologically safe when used as intended, and readily biodegradable, with the exception of non-biodegradable C6 fluorinated components. Additional information can be found in the product and safety data sheets.

FOAMOUSSE^®-FFFP - aqueous film-forming

are aqueous film-forming, protein-based low-expansion foam concentrates combined with AFFF fluorinated components which form a duplex aqueous film which, in turn, leads to significantly increased fire performance and burn-back resistance.

FOAMOUSSE^®-FFFP 3%	Details
Proportioning rate
Low-expansion foam	3%

Expansion
Low-expansion foam	up to 8 times

25% / 50% drain time
Low-expansion foam	up to 6 / 10 minutes

Frost-resistant	-15 °C
Viscosity
20 °C	≤ 15 mm²/s
0 °C	≤ 30 mm²/s
lowest use temp.	≤ 40 mm²/s

FOAMOUSSE^®,-FFFP 6%	Details
Proportioning rate
Low-expansion foam	6%

Expansion
Low-expansion foam	up to 8 times

25% / 50% drain time
Low-expansion foam	up to 6 / 10 minutes

Frost-resistant	-15 °C
Viscosity
20 °C	≤ 15 mm²/s
0 °C	≤ 30 mm²/s
lowest use temp.	≤ 40 mm²/s

Primary use: Chemical and petrochemical industry, refineries, aviation, maritime, tank storage facilities

Main application: non-polar hydrocarbon fires, hydrocarbons with small proportions of polar solvents.

Installations and equipment: Low-expansion foam installations, sub-surface installations, foam / water monitors, low-expansion foam branchpipes

FOAMOUSSE^® -FFFP foam concentrates are physiologically safe when used as intended, and readily biodegradable, with the exception of non-biodegradable C6 fluorinated components. Additional information can be found in the product and safety data sheets.